The order is chassis, bullbar bracket, winch cradle, bullbar.
Announcement
Collapse
No announcement yet.
winch cradle
Collapse
X
-
Originally posted by ondaboat View PostDoes the cradle bolt to car chassie or soverign bar?
Sent from my GT-I9000T using Tapatalk
Originally posted by waltec View PostOriginally posted by ondaboat View PostJust wondering does this winch cradle fit to the bull bar or the chassis as want to fit winch to ARB non winch bar
Cheers Adam
The cradle is sandwiched between the mounts and the bullbar, each bullbar uses its own mount, so I would seriously doubt if it would fit the ARB. If you find a friendly dealer (good luck!!) they may have one of the old style cradles lying around after the mount recall they could throw in the back of your car instead of the bin, might be able to modify it to suit the ARB. Nothing a grinder, a welder and a PP tech day couldn't fix!!!
Matt
MattLast edited by waltec; 04-03-2012, 08:28 PM.2003 Prado Grande TD Auto Pearl White
Comment
-
Howdy waltec
Obviously as you have shown, I did ask a question, whoops sorry if I have asked it again.
I guess it wasn't the awnser I wanted. Can't you say "hey buy this cradle and all will be well" but looks like I'm up for a new bar.
Damm you Arb why do the make 2 bars at basically the same price.
Thanks for your input Matt
Regards AdamYep.....I have a Prado just like you
Bugger Bali, get out and see Australia before we sell it all to China
My Rig Build Towing Camprite TL8s (if ya wanna look PM me)
Comment
-
Ok so just called Toyota about picking up a winch cradle, they don't stock them anymore and won't in the future. What are my options? Toyota Said get one made?? Has any one got plans or pictures of one? CheersI thought I would be differant and get a silver prado...
2004 Grande, 4lt petty, Sov front bar, 9000 Lb tigers winch, factory tow bar, Fwd Rec points, Safari Snorkel, Bushskinz bash plates, Austrack roof top tent on Steel RTT rack, Kings awning, ARB under bonnet compressor, Coleman on Demand HWS, IPad with retina on a Ram mount running Hema Navigator, GME TX 3400, Tekonsha P3 Brake controller, and a Stihl 181.
Comment
-
Originally posted by letterboxman View PostOk so just called Toyota about picking up a winch cradle, they don't stock them anymore and won't in the future. What are my options? Toyota Said get one made?? Has any one got plans or pictures of one? CheersLast edited by amts; 08-06-2013, 04:00 PM.
Comment
-
why am i not surprised...! the parts bloke...didn't sound too knowledgable!
Does anyone have the new part number please?I thought I would be differant and get a silver prado...
2004 Grande, 4lt petty, Sov front bar, 9000 Lb tigers winch, factory tow bar, Fwd Rec points, Safari Snorkel, Bushskinz bash plates, Austrack roof top tent on Steel RTT rack, Kings awning, ARB under bonnet compressor, Coleman on Demand HWS, IPad with retina on a Ram mount running Hema Navigator, GME TX 3400, Tekonsha P3 Brake controller, and a Stihl 181.
Comment
-
Sorry Amts, some thing strange is going on with my computer!
Cheers for the part number, ill try that on monday.
after my my last post i kept searching and found another thread that mentioned the new number
http://www.pradopoint.com/showthread...h-cradle/page5I thought I would be differant and get a silver prado...
2004 Grande, 4lt petty, Sov front bar, 9000 Lb tigers winch, factory tow bar, Fwd Rec points, Safari Snorkel, Bushskinz bash plates, Austrack roof top tent on Steel RTT rack, Kings awning, ARB under bonnet compressor, Coleman on Demand HWS, IPad with retina on a Ram mount running Hema Navigator, GME TX 3400, Tekonsha P3 Brake controller, and a Stihl 181.
Comment
-
the cradle isnt hard to mount, but an aftermarket winch needs a few mods to fit the Fairlead Roller t make it fit, the bracket comes with new bolts and fitting instructions, but you will need 2 new bolts for the Fairlead Roller 40mm long. the part number for the winch cradle is PZQ29602WC and got from toyota at $242. hope this helps anyone
Comment
-
Can anyone confirm that a VRS V9500 winch will fit the factory cradle.
Thanks in advance.04 GXL - Red Centa dual battery, Alloy B/bar, BFG AT's, Rhino Rack commercial bars x 3, GME TX3540, TJM roof cage, Outback Ideas recovery points, LHS rear drawer, 2" Dobinsons/Bilstein lift, ARB CKMA12 air compressor, CoilRite airbags, ARB 2.5m awning, MCC Dual Wheel Carrier, Eagle Eye headlights with 55w hid lo beam.
Comment
-
Hi guys I got the winch cradle for $220INC got it ordered and came in in 2 days fitted nice with basic tools. The longest part was trying to line the bar back up and finding somewhere to put the control box. Iv got the tigerz11 grande 12000 pound winch install very easy make sure you get the off set hawse it even came with a baintech duel battery setup for $50004 grande, bilstein A712 &A713 kings spring , 3 inch exhaust chip it chip, XGT lightforce, 1 x lightbar, Sov Bar, Tigerz11 Grande winch with rope, Oricom UHF.
Comment
Comment