Titan Drawers for Prado ?

[BigBlurter Lurker Find all posts View Profile Close BigBlurter]

I installed them last weekend and am very happy with them, the bolts however are the wrong pitch thread so throw them out, you'll need to buy M10X1.25 metric fine pitch thread x 40mm long bolts to fit the holes that the fold down seat latches were bolted into. Otherwise great value, I have a 40lt fridge so no dramas with fitting on the slide.

[fido666 Banned Find all posts View Profile Close fido666]

the bolts however are the wrong pitch thread so throw them out, you'll need to buy M10X1.25 metric fine pitch thread x 40mm long bolts to fit the holes that the fold down seat latches were bolted into.

Is that for the 150 series?

[Graz Senior Member Find all posts View Profile Close Graz]

Mine had the wrong pitch bolts as well for the 120

[dalefrench Lurker Find all posts View Profile Close dalefrench]

has anyone cut these into two so you can fit one and still use rear seats ?

[Shannoncq Lurker Find all posts View Profile Close Shannoncq]

Do you need to remove the carpet before installing rear draws?

[fatboydave Junior Member Find all posts View Profile Close fatboydave]

I'm half way through this. I'll let you know how I go...
I've cut the steel in half, so have 2 drawers but need to get some different bolts for the bearings as some of these go through both drawers.
I only wanted 1 drawer as I have the dog in the back sometimes and this seemed like a cheap option for a finished product.

[5logs Junior Member Find all posts View Profile Close 5logs]

I'm half way through this. I'll let you know how I go...
I've cut the steel in half, so have 2 drawers but need to get some different bolts for the bearings as some of these go through both drawers.
I only wanted 1 drawer as I have the dog in the back sometimes and this seemed like a cheap option for a finished product.

Do you want to sell the other half ?

[fatboydave Junior Member Find all posts View Profile Close fatboydave]

Not at the moment, but I'll let you know.

[5logs Junior Member Find all posts View Profile Close 5logs]

Cheers

[ziggle Junior Member Find all posts View Profile Close ziggle]

What colour are they?

Hi all,
For those that have bought them recently - what colour is the carpet? Some pics I've seen are blue, some are grey? Is it just a case of whatever they supply?
Thanks,
Tim

[mrkav Lurker Find all posts View Profile Close mrkav]

I'm half way through this. I'll let you know how I go...
I've cut the steel in half, so have 2 drawers but need to get some different bolts for the bearings as some of these go through both drawers.
I only wanted 1 drawer as I have the dog in the back sometimes and this seemed like a cheap option for a finished product.

How did you go with cutting them in half and only using 1 drawer?

[redfog Lurker Find all posts View Profile Close redfog]

They are fantastic but i did have to sand back my wings (not the draws) to make them fit more comfortably.

Build quality is good
Weight is not that big a deal when you consider they weigh the same as a person, and how often do you have 5 to 8 people in the car.
Runners are good
Slide is good although i don't use it, because the draws make your fridge sit higher some people like to use a drop down slide.
Tie downs work
Marine carpet is a good colour and doesn't look out of place

Timber may be lighter but steel draws are the go especially if you plan on driving on corrugations.

[ejukated Senior Member Find all posts View Profile Close ejukated]

are you able to install these drawers with a full height cargo barrier?

[Killswitch Senior Member Find all posts View Profile Close Killswitch]

are you able to install these drawers with a full height cargo barrier?

Also keen the know. I have a Milford.

[ejukated Senior Member Find all posts View Profile Close ejukated]

Also keen the know. I have a Milford.

well picked up my 2nd hand drawers today, its the 990mm deep twin drawers from a 100series and there is no way it will fit with a cargo barrier. They will just fit pushed right up againts the middle row seat with about a hands with clearance to the rear door however the fridge slide sometimes wont latch. You could oval the hole for the latch I guess however I am going to cut it into single drawers then evalute shortening from there as I want to keep the full height cargo barrier.

The Titan single drawers are only 900mm deep which would probably fit better but youd only be able to have one unit height wise due to the cargo barrier slope. They are <$300 each so not a bad deal at all if you just want 1 drawer

After evaluating a few combos last night - I think I will go with single drawer and fridge slide with a flat deck ontop of the fridge