Scangauge II X Gauge Codes for 6 Speed Auto 1GD Prado

[Mild7 Junior Member Find all posts View Profile Close Mild7]

Hi guys,

I'm not sure where to put this info.. Sorry if its in the wrong spot or if it has already been covered.

After a bit of experimentation with around 10 different X-Gauge codes from the Scangauge site, I am pretty sure that the following code works for ATF Temperature in the new 6 speed auto 1GD Prado:

ATF Temperature 4
07E02182
046105820000
2808
00010001FFD8
For 2011+ AUSTRALIAN FJ Cruiser. May work on other Toyota vehicles 2010+ if the other gauges above have not.

Hope it helps someone. Please let me know if you have information to the contrary.

Mike.

[brogers Advanced Member Find all posts View Profile Close brogers]

Hi guys,

I'm not sure where to put this info.. Sorry if its in the wrong spot or if it has already been covered.

After a bit of experimentation with around 10 different X-Gauge codes from the Scangauge site, I am pretty sure that the following code works for ATF Temperature in the new 6 speed auto 1GD Prado:

ATF Temperature 4
07E02182
046105820000
2808
00010001FFD8
For 2011+ AUSTRALIAN FJ Cruiser. May work on other Toyota vehicles 2010+ if the other gauges above have not.

Hope it helps someone. Please let me know if you have information to the contrary.

Mike.

Thanks Mike, very helpful indeed.

[Hally Senior Member Find all posts View Profile Close Hally]

Awesome been tring to find that.
Also I found the torque convertor one it's
07e02182
046105820000
3808
00010001ffd8
Hope helps to

[Hally Senior Member Find all posts View Profile Close Hally]

Found exhaust gas temp between the turbo outlet and the DPF uased a combo of numbers to get haven't checked with temp gun as yet to see if gauge is acurite.
Txd o7dfo178
Rxf 054106780000
Rxd 3810
Mth 0001000affd8

[Mild7 Junior Member Find all posts View Profile Close Mild7]

Nice one Hally.. If it works. What sort of numbers are you getting?

[Hally Senior Member Find all posts View Profile Close Hally]

Hi-way driving showing 340 degres c avg

[Mild7 Junior Member Find all posts View Profile Close Mild7]

Thanks mate. Will be trying this tonight 8-)

[Mild7 Junior Member Find all posts View Profile Close Mild7]

EGT seems to work perfectly well thanks Hally.

Last weeks trip from Melbourne to Merrimbula had me around 380-400 at 100-110 kph on the flat. This was fully loaded inside and on top with 265/70/17's. Went to a maximum of 505 degrees C for a few seconds coming up the hill to Gumbaya park, but not past 480 for any other part of the trip no matter the slope.

Thanks again.

[Hally Senior Member Find all posts View Profile Close Hally]

No probs
I also found the dpf one not sure if inlet or outlet of dpf. Will post it up when i get a chance. Temps get around 6-700 for it when doing a burn.

[cuda Advanced Member Find all posts View Profile Close cuda]

No probs
I also found the dpf one not sure if inlet or outlet of dpf. Will post it up when i get a chance. Temps get around 6-700 for it when doing a burn.

Did you end up finding the codes for the DPF sensors?

Thanks
Doug

[Hally Senior Member Find all posts View Profile Close Hally]

Not definitely, have got something but not exactly sure what it is.
Ill try to Remember and post what its is later

[cuda Advanced Member Find all posts View Profile Close cuda]

Not definitely, have got something but not exactly sure what it is.
Ill try to Remember and post what its is later

Thanks

[Hally Senior Member Find all posts View Profile Close Hally]

Im 90% sure this is Dpf this arvo car was doing a burn and egt was 340 and dpf was 520.
TXD 07DF0178
RXF 032100000000
RXD 2010
MTH 0001000AFFD8

Let me know how it goes for you

[cuda Advanced Member Find all posts View Profile Close cuda]

Im 90% sure this is Dpf this arvo car alwas doing a burn and egt was 340 and dpf was 520.
TXD 07DF0178
RXF 05410678000
RXD 4808
MTH 0001000AFFD8

Let me know how it goes for you

I tried these values but no joy. No data being displayed.

[Hally Senior Member Find all posts View Profile Close Hally]

I tried these values but no joy. No data being displayed.

Not sure what happened but wrote the wrong ones down.
I have edited the above one to correct (i hope)