email of the pages would be good as I could follow the wiring to make sure all is good then once I have done that I can take the car to Toyota and ask them to activate it if that's required
Today I have check the signal from the cc stalk to the clock spring (squib) behind the steering wheel and im getting readings coming out into the wiring loom of the car so I now know all the stalk and squib are fine and the signal is passing through. I have also took the dash out of the car to check that there is a bulb in the cruise light on the cluster and this is present and working
Im now looking for how the brake pedal switch works with the cruise control and how many switches there are on the pedal ?
Hi guys a quick update I have found that the connector inside the steering wheel has 4 connections one of these is taken up to operate the horn so that leaves 3 connections for the cruise control but where the car wiring loom plugs into the squib there are only 3 wires one of these must be for the horn so that is only leaving 2 wires for the cruise but im thinking that 3 are required to work the cruise the question is where does the 3 wire connect to on the car ??
Comment