Rear Underbody water tank for 150 Prado

[d.walez Lurker Find all posts View Profile Close d.walez]

Hi Tin

I'm interested in in one of the water tank setup's if you have any left? Its for my 2010 150 with a factory rear bar.
Are you able to let me know what each setup costs, basic & full pump?

Thanks Dan

[Tin175 Senior Member Find all posts View Profile Close Tin175]

Hi Tin

I'm interested in in one of the water tank setup's if you have any left? Its for my 2010 150 with a factory rear bar.
Are you able to let me know what each setup costs, basic & full pump?

Thanks Dan

I am just finishing up another batch and there is still one left if anyone is interested. The basic tank costs $540 plus shipping (approx $30-60). This included breathers, a tap and basic clear tube level gauge.

Pump will cost about $50 for a pump with a switched faucet. Electric Level Gauge will cost about $100. If plumbing upto the door you will need to allow for some reinforced 10mm hose and about 4 hours to run the hose and wires.

[pjorek Advanced Member Find all posts View Profile Close pjorek]

Not keen to do something for the 120 with the rear air cons?? so later model GXL, VX and Grande?

[shonky 150 Member Find all posts View Profile Close shonky 150]

My tank got delivered yesterday all I can say is well done Tin you do an excellent job so professional it's better quality than I expected.

Thanks Tin.

[Tin175 Senior Member Find all posts View Profile Close Tin175]

My tank got delivered yesterday all I can say is well done Tin you do an excellent job so professional it's better quality than I expected.

Thanks Tin.

Thanks for the feedback. Glad you like it. Here is a link to some fitting instructions. Let me know if you have any questions

https://docs.google.com/presentation...it?usp=sharing

[shonky 150 Member Find all posts View Profile Close shonky 150]

thanks Tin that will be tomorrows job.

[photomcmillan Lurker Find all posts View Profile Close photomcmillan]

Hey,

I'm really interested in getting one of these. Let us know when you have one available.

Also has anyone used this with any other towbars other than the toyota genuine? Haven't got a towbar yet but need to get one soon.

Thanks,
Mitch

[aaron_c_83 Lurker Find all posts View Profile Close aaron_c_83]

Tin175 are you looking at making anymore the near future? Very keen to fit one to my 2012 Altitude with Toyota tow bar. I would just require the simple plastic level indicator.

[Tin175 Senior Member Find all posts View Profile Close Tin175]

Tin175 are you looking at making anymore the near future? Very keen to fit one to my 2012 Altitude with Toyota tow bar. I would just require the simple plastic level indicator.

Yes, I have just started another batch. If anyone is interested please see this thread.

http://www.pradopoint.com/showthread...less-Steel-30L

[photomcmillan Lurker Find all posts View Profile Close photomcmillan]

All installed thanks Tin great product!

I was wondering if anyone had any links to the pumps they have used and what they paid? Also is it waterproof, and if it was to get submerged while doing a creek crossing would it cause a problem?

[aaron_c_83 Lurker Find all posts View Profile Close aaron_c_83]

Thanks Tin, awesome fit mate and a very neat job.

[Tin175 Senior Member Find all posts View Profile Close Tin175]

Thanks Tin, awesome fit mate and a very neat job.

Thanks for the feedback. Glad it went smoothly for you.

[gbingham Lurker Find all posts View Profile Close gbingham]

Tin175, are there any tanks left over from the last batch or are you looking for numbers to run another as I would be interested.

[Tin175 Senior Member Find all posts View Profile Close Tin175]

Yes I have a tank left from the last batch and maybe another. I'll send you a PM.

[Dobbie84 Lurker Find all posts View Profile Close Dobbie84]

are you still making these tanks ??