Just wanted to pass on my thanks for an awesome product - see my install below. Works fine with child seats, just takes slightly longer to install as the rear strap necessitates the unscrewing of the the headrest bolts to either remove or reinstall the child seats - only a few minutes if that.
Prado 150 D4D AUTO GXL with ARB Deluxe Winchbar, Brains' TG150 Transfer Case Actuator Guard, Bilstein/Ridepro 50mm Lift, Safari Snorkel, D697 265/65/17 LTs, Dual Battery Setup with REDARC Controller, REDARC Tow Pro, Toyota Tow Bar, Maxtrax - towing a Camprite TL8s fitted with GXL wheels and D697s.
Just wanted to pass on my thanks for an awesome product - see my install below. Works fine with child seats, just takes slightly longer to install as the rear strap necessitates the unscrewing of the the headrest bolts to either remove or reinstall the child seats - only a few minutes if that.
Joe its easier to remove the headrest and reinstall.
Dan
2012 GXL T/D Auto in white....ARB Bullbar, Bash plates, Alloy Roofrack, Awning and IPFs/ Airtec Snorkel/ GME UHF/ MSA Seatcovers/Outlaw Exhaust/ MT P3s/ OME lift/ Kaymar Rear Bar/ Drifta drawers/ ARB 60L fridge/ Powerful 4x4 Rock Rails/ Magnum 12K winch/ Sandgrabbas
Yes, of course it would be! Was looking at it from only one side! Cheers.
Prado 150 D4D AUTO GXL with ARB Deluxe Winchbar, Brains' TG150 Transfer Case Actuator Guard, Bilstein/Ridepro 50mm Lift, Safari Snorkel, D697 265/65/17 LTs, Dual Battery Setup with REDARC Controller, REDARC Tow Pro, Toyota Tow Bar, Maxtrax - towing a Camprite TL8s fitted with GXL wheels and D697s.
great product does the middle seat still fold down? looks like it does.
need to put the fishing rods down the guts.
the top mounting brackets were the grab handles are will they leave an indentation once removed on the hood lining?
great job there.
Centre will still fold down. You can also pull the headrests out and flip down the outside seats too. Good for accessing stuff behind the seats when you fully loaded up.
Top brackets are clamped up against the hood lining and will probably leave an indentation. Easy way around this would be to put some washers behind the brackets to space it off the lining.
Have been considering some clips or brackets so I can mount rods and long objects along the roof in the gap above the barrier.
Call it a pet barrier and it doesn't matter what rules it complies with. That's what they did with the one made in the United States for the FJ cruisers.
Also keen to purchase one if any left please?
Normal barrier will not fit my 150 Altitude with the MSA fridge slide on some drawers. So this will be perfect.
Crystal Pearl Altitude 150 Landcruiser Prado. TJM sensor bar, brush guard, side steps. KM2 BFG on GXL alloys. Kaymar bar, Drifta and MSA fridge slide. ARB locker and compressor, and MK11 compressor and fuel filter bracket.
Hi tin, how's the prado 120 prototype barrier coming along?
Been distracted with holidays and camping over the last coupling of weeks. Got a chance to fit up the prototype last night. I am happy with the fit and it only needs a few tweaks.
This was fitted to a 120 GX. I need to confirm that the GXL's have the same seats. Can someone with a 120 give me a measurement from the top of the seat (bottom of the head rests) to the roof lining.
Comment