This afternoon i went to my chiropractor appointment and when i went back out to drive home i started the car as per usual but something was NOT right. I have a 2004 V6 Grande with 187k on the clock. When i started the car i went to move it from P into D but the gear stick wouldn't shift across, i had depressed the brake like usual but it still wouldn't move. I then pushed the shift lock button and it allowed it to change gears.
Then i looked at the instrument cluster and noticed the ABS, ASC TRC and ASC OFF lights lit on the cluster. I turned the car off and restarted it two more times yielding the same results. Anyways i started driving and everything seems to be working as it should, after about 5 minutes of driving the lights all turned off.
I filled the car up and when i hopped back in it started like usual, changed into gear like usual, and there were no extra lights lit on the cluster. When i pulled out of the servo i gave it a little bit to see if the traction control was working, which it was and i tested the ABS on the trip home on a dead end road and all was good there too..
Could anyone shed some light on what this may be? I have to get it in for a service and to replace the front brake rotors and pads again in the next week so i will get my mate to plug it in to see if there are any error codes but in the interim would anyone have any suggestions?
Then i looked at the instrument cluster and noticed the ABS, ASC TRC and ASC OFF lights lit on the cluster. I turned the car off and restarted it two more times yielding the same results. Anyways i started driving and everything seems to be working as it should, after about 5 minutes of driving the lights all turned off.
I filled the car up and when i hopped back in it started like usual, changed into gear like usual, and there were no extra lights lit on the cluster. When i pulled out of the servo i gave it a little bit to see if the traction control was working, which it was and i tested the ABS on the trip home on a dead end road and all was good there too..
Could anyone shed some light on what this may be? I have to get it in for a service and to replace the front brake rotors and pads again in the next week so i will get my mate to plug it in to see if there are any error codes but in the interim would anyone have any suggestions?
Comment