Tweet
Hey guys, I just swapped my Toyota bar for an ARB and now I have this surplus to my needs. Located in Wyndham Vale 3024.
Uploaded with ImageShack.us
I removed this from my 06/2010 Prado purely to fit an ARB bull bar so I can fit a winch.
The bull bar comes with everything you need to fit it to your car, brackets, bolts, lights etc.... Please note that the bull bar is from a GX model so does not come with foglights but the provision for them is in the bar and will only require unscrewing the blanking plates installed. Nor does it have holes for front parking sensors but these would be easy to drill to fit!
There is about 6 bolts missing that attach the undertrays. They needed to be drilled out, however they are standard M6 threads. The original bolts they had were nice looking allen key bolts but are useless to undo.
I have made a template in paper(not pictured) of where the original plastic bumper needs to be trimmed and have also provided the offcuts to give you an idea of where the bumper needs to be cut.
Overall the condition is commensurate of a bar this age, some small stone chips but absolutely no dents or bends, has never been in an accident and has never seen anything more extreme than a gravel road. You could have it machine polished if you were that way inclined but it presents very well with regular hand polishing.
Compete package weighs 46KG
These retail in excess of $2100 new I'm after something around $600, less for a really fast sale ;-)
I can be contacted on O4I2 7O7 5I8
Cheers Brad
It is also listed on eBay, Link: http://cgi.ebay.com.au/ws/eBayISAPI....m=171171231839
Uploaded with ImageShack.us
I removed this from my 06/2010 Prado purely to fit an ARB bull bar so I can fit a winch.
The bull bar comes with everything you need to fit it to your car, brackets, bolts, lights etc.... Please note that the bull bar is from a GX model so does not come with foglights but the provision for them is in the bar and will only require unscrewing the blanking plates installed. Nor does it have holes for front parking sensors but these would be easy to drill to fit!
There is about 6 bolts missing that attach the undertrays. They needed to be drilled out, however they are standard M6 threads. The original bolts they had were nice looking allen key bolts but are useless to undo.
I have made a template in paper(not pictured) of where the original plastic bumper needs to be trimmed and have also provided the offcuts to give you an idea of where the bumper needs to be cut.
Overall the condition is commensurate of a bar this age, some small stone chips but absolutely no dents or bends, has never been in an accident and has never seen anything more extreme than a gravel road. You could have it machine polished if you were that way inclined but it presents very well with regular hand polishing.
Compete package weighs 46KG
These retail in excess of $2100 new I'm after something around $600, less for a really fast sale ;-)
I can be contacted on O4I2 7O7 5I8
Cheers Brad
It is also listed on eBay, Link: http://cgi.ebay.com.au/ws/eBayISAPI....m=171171231839
Comment