Announcement

Collapse
No announcement yet.

ARB/TJM air compressor & fuel filter bracket for 120/150

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Put me down for one of the combined units for the 150 when you get them sorted. Tried to PM you but got message your in box full. Thanks.


    Sent from my iPad using Tapatalk HD
    2012 GXL White Prado. TJM BUllbar, TJM Winch, TJM Side Steps and Bush Bars, Black Widow Drawers, MSA Fridge Drop Slide, TJM Dual Battery Setup with Optima Battery, TJM Snorkel, Black Widow Roof Rack with Fred's Arm & TJM Awning, GME 3340 UHF, HID Drivivng Lights, TJM full underbody protection, Morosso Oil catch can, MSA Canvas Seat Covers, Kaymar Rear Bar with Dual Wheel Carriers. Cooper STMax tyres on original rims.Scanguage II.

    Comment


    • #47
      Sorry ptnlinda, it gets full regularly. Feel free to email me too.

      Comment


      • #48
        Email sent


        Sent from my iPad using Tapatalk HD
        2012 GXL White Prado. TJM BUllbar, TJM Winch, TJM Side Steps and Bush Bars, Black Widow Drawers, MSA Fridge Drop Slide, TJM Dual Battery Setup with Optima Battery, TJM Snorkel, Black Widow Roof Rack with Fred's Arm & TJM Awning, GME 3340 UHF, HID Drivivng Lights, TJM full underbody protection, Morosso Oil catch can, MSA Canvas Seat Covers, Kaymar Rear Bar with Dual Wheel Carriers. Cooper STMax tyres on original rims.Scanguage II.

        Comment


        • #49
          Any news amts?
          2008 D4D M6 GXL [MT ATZ-P3][Whitey's Ironman 45710FE/45682FE+KTFR101H/Dob487][extended Roadsafe links][Polyairs][DBA T3/T2][amts diffdrop & recovery points][Tin175's stone guards][Bushskins BashPlate][ARB Sahara][IPF 900s][Snorkel][WindCheetah][MaxTrax][IC-440][Parrot Asteroid][ARB Fridge][Lifestyle 2nd Row Fridge Mount][ARB Compressor][Thumper][SandGrabbers][Cargo Barrier][Tigerz Awning][MCC Rear Bar]

          Comment


          • #50
            The powder coater is snowed under. Reason being that he laid off a few staff the week before and then work came in after. So he's still catching up and had to get 1 guy back to help.

            Comment


            • #51
              That's be powder snow then

              No worries. Thanks for the update.
              2008 D4D M6 GXL [MT ATZ-P3][Whitey's Ironman 45710FE/45682FE+KTFR101H/Dob487][extended Roadsafe links][Polyairs][DBA T3/T2][amts diffdrop & recovery points][Tin175's stone guards][Bushskins BashPlate][ARB Sahara][IPF 900s][Snorkel][WindCheetah][MaxTrax][IC-440][Parrot Asteroid][ARB Fridge][Lifestyle 2nd Row Fridge Mount][ARB Compressor][Thumper][SandGrabbers][Cargo Barrier][Tigerz Awning][MCC Rear Bar]

              Comment


              • #52
                Should be ready for pickup this Wednesday. Expect an email to be sent to you if you have already emailed me.
                If you haven't already emailed me, please do so as per the instructions in the first post.

                While waiting, I have sourced some insertion rubber sheet to put in between the bracket and the wheel arch and side guard. Also got rubber feet to put in between the air compressor and the bracket.

                Also confirmed that the price is $120 with all hardware included. Postage is $18 to anywhere in Oz.

                Comment


                • #53
                  Picked up the bracket and it is now ready to go.

                  Click image for larger version

Name:	2013-04-10_17-56-39_803.jpg
Views:	1
Size:	91.3 KB
ID:	643835

                  Comment


                  • #54
                    Originally posted by amts View Post
                    Picked up the bracket and it is now ready to go.

                    [ATTACH=CONFIG]10406[/ATTACH]
                    Excellent ill fix mine up tomorrow
                    [SIZE=2]Black 2009 150 Series D4D GXL Prado, [B]TG150[/B] Transfer Case & Actuator Guard, TJM T13 bar, TJM 9.5lb Winch, Airtec Snorkel, TJM steel sidesteps and sidebars, TJM Underbody Protection, TJM XGS Gold Suspension, Tinted, ARB Fridge Freezer, Couplertec System, Foxwing Awning, 80AH Dual battery, 8" indash GPS, Wet Seat seatcovers, GME TX3540, TX3110 & TX680, [B][COLOR=#ff6633]Maxtrax[/COLOR][/B], Kaymar Dual Wheel Carrier, Breathers, Federal MT's.[/SIZE]

                    Comment


                    • #55
                      Combo ARB compressor and fuel filter bracket

                      Some progress on the combo ARB compressor and fuel filter bracket.


                      Comment


                      • #56
                        Just received my compressor bracket - very nice job there Andrew, thanks. Now to find time to fit it. Also have to decide if I am going to fit my original compressor or to get a new ARB one.

                        Comment


                        • #57
                          Combo bracket looking good there Andrew.

                          My Racor with filter and bowel is 235 mm from the top of the bracket to the bottom of the drain. The drain screws in to open so will not be any longer. Does your bracket fit this with room to spare? Happy to post more dimensions if you wish.

                          Hazza
                          Silver 120 Series Diesel GXL 2009 with Option Pack 2, king Springs 2" Lift with 'H' front spring, MT ATZ 4-RIB, Dual Battery, Deluxe ARB Bull-bar, Winch, Towbar, Anderson 50 amp plug at the rear, Weather Shields, Bonnet and Head Light Protectors, Rubber Mats inc Cargo mat, UHF Ariel, Portable Uniden UHF plugs into areal, On-board ARB Compressor, Brains Black Box TG150 Protector, Rear Black Duck Seat Covers.

                          Comment


                          • #58
                            Originally posted by Trekrider View Post
                            Just received my compressor bracket - very nice job there Andrew, thanks. Now to find time to fit it. Also have to decide if I am going to fit my original compressor or to get a new ARB one.
                            As per our email correspondence, it appears that Trekrider has found a snag with brackets. The charcoal canister on my 2003 Grande is different to his 2006 GXL. Rummaging through toyodiy, there appears to be 2 part numbers listed for the charcoal canister and its bracket from 2005 onwards. But only 1 part number listed for 2003 and 2004 120s. I have emailed those with a V6 and those who did not state whether they have a V6 or a diesel to check the size of the charcoal canister.

                            The larger canister is fitted from 2005 onwards and uses one of the side holes on the guard. This larger canister is not compatible with the ARB compressor bracket unless it can be moved.

                            This does not affect diesel models. (At least I don't think so).

                            Comment


                            • #59
                              Hi amts, I have sent a pm

                              Comment


                              • #60
                                Originally posted by amts View Post
                                As per our email correspondence, it appears that Trekrider has found a snag with brackets. The charcoal canister on my 2003 Grande is different to his 2006 GXL. Rummaging through toyodiy, there appears to be 2 part numbers listed for the charcoal canister and its bracket from 2005 onwards. But only 1 part number listed for 2003 and 2004 120s. I have emailed those with a V6 and those who did not state whether they have a V6 or a diesel to check the size of the charcoal canister.

                                The larger canister is fitted from 2005 onwards and uses one of the side holes on the guard. This larger canister is not compatible with the ARB compressor bracket unless it can be moved.

                                This does not affect diesel models. (At least I don't think so).
                                I've just had a closer look and the compressor bracket will need a large chunk cutting out of it to fit The big question is, having modified it, will there still be room for the actual compressor to fit. I need to do some measuring to see if it will fit before I start cutting.

                                If anyone in Perth wants a bracket then I might be interested in selling it rather than modifying it.

                                Comment

                                canli bahis siteleri bahis siteleri ecebet.net
                                mencisport.com
                                antalya escort
                                tsyd.org deneme bonusu veren siteler
                                deneme bonusu veren siteler
                                gaziantep escort
                                gaziantep escort
                                asyabahis maltcasino olabahis olabahis
                                erotik film izle Rus escort gaziantep rus escort
                                atasehir escort tuzla escort
                                sikis sex hatti
                                en iyi casino siteleri
                                deneme bonusu veren siteler
                                casibom
                                deneme bonusu veren siteler
                                deneme bonusu veren siteler
                                betticket istanbulbahis
                                Working...
                                X