120 Prado shift lever repair kit

[Guest Close Guest]

Hey Amts,

Thanks for the kit, it arrived today and took me all of 10 minutes to install, sloppy shift problem solved, thanks mate your a legend,

Cheers,

Mike.

Quick work! And you're welcome.

[Geebung71 Lurker Find all posts View Profile Close Geebung71]

Kit fitted in less than 1/2 hr including a quick vacuum of console insides.
Good as new, Cheers.

[daviduj Lurker Find all posts View Profile Close daviduj]

Ordered!

[Guest Close Guest]

Ordered!

Sending off later today.

[kidkuts Lurker Find all posts View Profile Close kidkuts]

Amts - you still selling those 120 Prado shift lever repair kits?

[Guest Close Guest]

Amts - you still selling those 120 Prado shift lever repair kits?

Yes I am

[Guest Close Guest]

JHartley,
If you are reading this, please email me with another email address.
The kits are still available.

[johnny-no-mates Lurker Find all posts View Profile Close johnny-no-mates]

--- amts ---- .

Thanks Bud. Dodgy email this week. Will Paypal an order through. Thanks for your message and look forward to curing my floppy stick (well, one of them!)

[Guest Close Guest]

--- amts ---- .

Thanks Bud. Dodgy email this week. Will Paypal an order through. Thanks for your message and look forward to curing my floppy stick (well, one of them!)

Thanks Johnny.

[Albo Lurker Find all posts View Profile Close Albo]

Just like to thank amts for his great fix.
fitted mine today, better than new.
fitting one for a friend next week.

Regards

Albo

[daviduj Lurker Find all posts View Profile Close daviduj]

A big thanks to Amts, fitted mine today and the instructions are great and the shifter better than new!

[johnny-no-mates Lurker Find all posts View Profile Close johnny-no-mates]

Thanks Johnny.

Big thank you! Kit arrived here in the UK in about a week. Fitted today in around 20 mins - perfecto!

Here's to another 115,000 miles.

[Antonio Martins Lurker Find all posts View Profile Close Antonio Martins]

Today i got a flappy gear shift, and after taking everything apart, i found out that where the bullet goes is broken will this repair kit work or do i have to get a new plastic piece? Whats the difference between this bullet/spring vs the original, and why i dont have to replace the track aswell?
Thank you for your post and your time.
Here some pictures

[Guest Close Guest]

Today i got a flappy gear shift, and after taking everything apart, i found out that where the bullet goes is broken will this repair kit work or do i have to get a new plastic piece? Whats the difference between this bullet/spring vs the original, and why i dont have to replace the track aswell?
Thank you for your post and your time.
Here some pictures

Hi Antonio,
The plastic collar has broken more than I have seen. The extent of other's breaks is just a crack.
To replace the entire shifter assembly is $900. You can try the repair kit first as it is a much lower cost compared to the entire assembly.
The track will wear slightly with use over the years but the new parts in the repair kit compensates for this.

[Antonio Martins Lurker Find all posts View Profile Close Antonio Martins]

Once again thank you so much for your help, im going to try to figuerout what to do, and will let you know when possible