7" 55W HID euro and spot beam driving lights

[Guest Close Guest]

SGS, if you would like to confirm your colour, then that would be it for this round of orders. I currently have you down as 2x Euro in black.

[Corigator Avid PP Poster! Find all posts View Profile Close Corigator]

In that case could I make it 1 spot & 1 Euro in Red trim please - That would be great!

Sorry mate forgot to mention 7" 55W in Red trim, 1 Spot & 1 Euro - Greg

I'll wake up on day (I hope)

[don1 Member Find all posts View Profile Close don1]

Hi amts. did you try fitting 3X7" lights in the bullbar? Thanks...

[Guest Close Guest]

Sorry mate forgot to mention 7" 55W in Red trim, 1 Spot & 1 Euro - Greg

OK noted

Hi amts. did you try fitting 3X7" lights in the bullbar? Thanks...

There's no problems with space on the Sovereign bar. I'm more worried about the cops. But I think 2 euros and 1 spot in the middle would be a very nice combo for me if (I'm allowed).

[Guest Close Guest]

Is anyone in this batch interested in these switches to go with the new HIDs?
http://www.pradopoint.com/showthread...s-amp-Switches
If so, let me know as I will be ordering some for myself.

[SGS Member Find all posts View Profile Close SGS]

Hi Andrew, I would like to confirm that I will have 2 Euro Black/Red (sorry for the change).
Re switches, I like these;- http://www.ebay.com.au/itm/TOYOTA-LI...item5ae7fb0b9c

Thanks.

[hang_on Lurker Find all posts View Profile Close hang_on]

Is anyone in this batch interested in these switches to go with the new HIDs?
http://www.pradopoint.com/showthread...s-amp-Switches
If so, let me know as I will be ordering some for myself.

AMTS, i can't get access to the link from the thread, how much are they? iI forgot also to Ask does the HID lights come with the wiring harness?

Cheers
Andy

[Guest Close Guest]

From memory, it is $5 for the etched switch, then add $10 for the body. There are different configurations for the body due to the different coloured LEDs. The $10 is the average price. They are from $9 to $11.25.
Yes, wiring harness is included but the switch isn't as flashy as the Contura rocker switches.

[ValleyGXL120 Junior Member Find all posts View Profile Close ValleyGXL120]

Bugger! wished I had logged on and seen this thread before you closed it off, will have to keep an eye on it if your ordering again. Would definately be interested in 2 x 7" spots, black with red trim
Cheers Andy

[Guest Close Guest]

There's always next time.

[hang_on Lurker Find all posts View Profile Close hang_on]

From memory, it is $5 for the etched switch, then add $10 for the body. There are different configurations for the body due to the different coloured LEDs. The $10 is the average price. They are from $9 to $11.25.
Yes, wiring harness is included but the switch isn't as flashy as the Contura rocker switches.

AMTS, Can you add the switch to my sets of light please. Don't know colour or configuration to choose from so will leave it to you to select to best suit my 120 Grande 2008 please. Cheers Andy

[Guest Close Guest]

I think I will go with this one
http://www.otrattw.com/proddetail.php?prod=VVPZCN5-17U
with green upper and lower red.

The green will match the rest of the dash lights. Not sure how bright the red is but we'll have to take a gamble on that one. I intend to put mine on the right hand cluster where the mirror adjustments are.

[hang_on Lurker Find all posts View Profile Close hang_on]

Agreed with you on the green to match the dash lights. The red should fit well with mine speedo and will also be putting it next to the mirror adjustment as i currently have 2 spare switch not used. Can't wait to see the kit fitted.

[Guest Close Guest]

Just came back from a test run. My colleague rigged up my 7" spot with a handle and wired it to a ciggy curly cord. so I took that out for a test and hung it out the window.

This is hi-beam and the 2 euros.


This is hi-beam + 2 euros + 1 spot. Note that the spot is coming from there the snorkel is as I am handholding it. I should have also set white balance to manual on the camera as both shots have a different colour. The spot is aimed in between the euros and slightly above so you can see the difference.


There is a bit of spill from the spot for a bit of periphery vision as you can see with the bonnet lit up.

This is just the spot with no other lights, aimed at a closer distance to the car.

[Guest Close Guest]

Here is a pic of the LED light bar mounted under my roof platform. It currently needs spacing down from the roof platform to allow for upwards adjustment to make it point level. It is currently pointing too low.


I could have mounted above the rack but I didn't want to make the car any higher; I carry a long kayak on the roof; and being under the rack makes it not so conspicuous.