Tweet
Well done Paul. From this pic you can really see just how exposed the case was! Excellent bit of kit that looks to tick all the boxes!
-
2004 V6 Grande. BLACK - -
No worries Bill, glad to have it on our Prados as well.Originally posted by Croweprado View Post
Just fitted my TG150 and it was straight forward and looks awesome. It is a very good fit and will offer the necessary protection. Thanks very much to the two Pauls.
Bill.
Paul[SIZE=2]Black 2009 150 Series D4D GXL Prado, [B]TG150[/B] Transfer Case & Actuator Guard, TJM T13 bar, TJM 9.5lb Winch, Airtec Snorkel, TJM steel sidesteps and sidebars, TJM Underbody Protection, TJM XGS Gold Suspension, Tinted, ARB Fridge Freezer, Couplertec System, Foxwing Awning, 80AH Dual battery, 8" indash GPS, Wet Seat seatcovers, GME TX3540, TX3110 & TX680, [B][COLOR=#ff6633]Maxtrax[/COLOR][/B], Kaymar Dual Wheel Carrier, Breathers, Federal MT's.[/SIZE]Comment
-
No worries Daniel, will be trying to get there on Sunday as well, maybe have a big day on Saturday packing for camping at Easter.Originally posted by Rogerthatv2 View Post
Paul[SIZE=2]Black 2009 150 Series D4D GXL Prado, [B]TG150[/B] Transfer Case & Actuator Guard, TJM T13 bar, TJM 9.5lb Winch, Airtec Snorkel, TJM steel sidesteps and sidebars, TJM Underbody Protection, TJM XGS Gold Suspension, Tinted, ARB Fridge Freezer, Couplertec System, Foxwing Awning, 80AH Dual battery, 8" indash GPS, Wet Seat seatcovers, GME TX3540, TX3110 & TX680, [B][COLOR=#ff6633]Maxtrax[/COLOR][/B], Kaymar Dual Wheel Carrier, Breathers, Federal MT's.[/SIZE]Comment
-
We originally made the guards so that you could leave the original OEM guard on and fit the TG150 or TG120 over the top but all that have been installed have been done without the OEM guard. Below are photos showing the OEM guard inside our Transfer Guards.
[SIZE=2]Black 2009 150 Series D4D GXL Prado, [B]TG150[/B] Transfer Case & Actuator Guard, TJM T13 bar, TJM 9.5lb Winch, Airtec Snorkel, TJM steel sidesteps and sidebars, TJM Underbody Protection, TJM XGS Gold Suspension, Tinted, ARB Fridge Freezer, Couplertec System, Foxwing Awning, 80AH Dual battery, 8" indash GPS, Wet Seat seatcovers, GME TX3540, TX3110 & TX680, [B][COLOR=#ff6633]Maxtrax[/COLOR][/B], Kaymar Dual Wheel Carrier, Breathers, Federal MT's.[/SIZE]Comment
-
TG 120 Install
The 120 Prado with standard OEM Transfer Case Guard.
Remove the 4 Bolts holding the OEM Transfer Guard on the bottom of the Transfer Case.
Using these bolts attach the TG120 to the bottom of the Transfer Case.
Cont...[SIZE=2]Black 2009 150 Series D4D GXL Prado, [B]TG150[/B] Transfer Case & Actuator Guard, TJM T13 bar, TJM 9.5lb Winch, Airtec Snorkel, TJM steel sidesteps and sidebars, TJM Underbody Protection, TJM XGS Gold Suspension, Tinted, ARB Fridge Freezer, Couplertec System, Foxwing Awning, 80AH Dual battery, 8" indash GPS, Wet Seat seatcovers, GME TX3540, TX3110 & TX680, [B][COLOR=#ff6633]Maxtrax[/COLOR][/B], Kaymar Dual Wheel Carrier, Breathers, Federal MT's.[/SIZE]Comment
-
The finished Product
Sorry but in these times I have to include this.
Disclaimer: The purchase and installation of the TG150 and the TG120 Traction Control guard is at the sole responsibility of the purchaser/owner.
We are not to be held liable for any damage to your vehicle as a result of impact or any off road driving.Last edited by Brains; 27-03-2012, 11:44 PM.[SIZE=2]Black 2009 150 Series D4D GXL Prado, [B]TG150[/B] Transfer Case & Actuator Guard, TJM T13 bar, TJM 9.5lb Winch, Airtec Snorkel, TJM steel sidesteps and sidebars, TJM Underbody Protection, TJM XGS Gold Suspension, Tinted, ARB Fridge Freezer, Couplertec System, Foxwing Awning, 80AH Dual battery, 8" indash GPS, Wet Seat seatcovers, GME TX3540, TX3110 & TX680, [B][COLOR=#ff6633]Maxtrax[/COLOR][/B], Kaymar Dual Wheel Carrier, Breathers, Federal MT's.[/SIZE]Comment
-
TG150 Install
The contents include the TG150 guard plus the following hardware;
TG150 Guard
2 x Spacer Washers (black)
2 x M12 Washers
2 x Spring washers
2 x High Tensile bolts
4 x M8 washers
You will utilise the original 4 bolts from the
OEM Transfer Case guard. Use the M8 washers on these bolts.
(Note: 4 x M8 washers have been supplied for these bolts)
The OEM Transfer Case guard in place which offers no protection to the actuator box (black plastic box)
This box is present on the 150 Prado and the 120 Prado VX, Grande and GXL with Option Pack 2.
1.
Undo the 4 bolts holding the OEM Transfer Case Guard and remove the OEM Transfer Case Guard.
Tools required - 12mm ratchet spanner, or 12mm ring spanner, or 12mm socket, and Socket set extension.
2.
Place the TG150 in position.
Cont...Last edited by Brains; 22-08-2012, 10:45 PM.[SIZE=2]Black 2009 150 Series D4D GXL Prado, [B]TG150[/B] Transfer Case & Actuator Guard, TJM T13 bar, TJM 9.5lb Winch, Airtec Snorkel, TJM steel sidesteps and sidebars, TJM Underbody Protection, TJM XGS Gold Suspension, Tinted, ARB Fridge Freezer, Couplertec System, Foxwing Awning, 80AH Dual battery, 8" indash GPS, Wet Seat seatcovers, GME TX3540, TX3110 & TX680, [B][COLOR=#ff6633]Maxtrax[/COLOR][/B], Kaymar Dual Wheel Carrier, Breathers, Federal MT's.[/SIZE]Comment
-
3.
Using the 4 bolts that were holding the OEM guard on in step 1, start the 4 x bolts with the now supplied 4 x M8 washers by turning a few turns to hold guard in position but allowing the guard movement. Put the front two bolts in first and then the rear two.
(Note-Use a 12mm socket and extension to get the drivers side rear bolt placed.)
4.
Prepare the lower High Tensile bolt, spring washer and washer with spacer washer. Place the spacer washer in between the guard and transfer and start the lower bolt. You will have to move the TG150 to get the holes to line up. Start to tighten.
Cont...Last edited by Brains; 22-08-2012, 10:46 PM.[SIZE=2]Black 2009 150 Series D4D GXL Prado, [B]TG150[/B] Transfer Case & Actuator Guard, TJM T13 bar, TJM 9.5lb Winch, Airtec Snorkel, TJM steel sidesteps and sidebars, TJM Underbody Protection, TJM XGS Gold Suspension, Tinted, ARB Fridge Freezer, Couplertec System, Foxwing Awning, 80AH Dual battery, 8" indash GPS, Wet Seat seatcovers, GME TX3540, TX3110 & TX680, [B][COLOR=#ff6633]Maxtrax[/COLOR][/B], Kaymar Dual Wheel Carrier, Breathers, Federal MT's.[/SIZE]Comment
-
5.
Prepare the top High Tensile bolt, spring washer and washer with spacer washer. Place the spacer washer in between the guard and transfer and start the top bolt. You will have to move the guard into position to allow the holes to line up.
6.
Tighten the lower High Tensile bolt.
Tools required - 19mm ratchet spanner, or 19mm spanner or 19mm socket spanner.
7.
Tighten the top High Tensile bolt.
Tools required - 19mm ratchet spanner, or 19mm spanner, or 19mm socket spanner
8.
Tighten the driver’s side rear bolt.
Tools required - 12mm socket spanner with extension.
Cont...[SIZE=2]Black 2009 150 Series D4D GXL Prado, [B]TG150[/B] Transfer Case & Actuator Guard, TJM T13 bar, TJM 9.5lb Winch, Airtec Snorkel, TJM steel sidesteps and sidebars, TJM Underbody Protection, TJM XGS Gold Suspension, Tinted, ARB Fridge Freezer, Couplertec System, Foxwing Awning, 80AH Dual battery, 8" indash GPS, Wet Seat seatcovers, GME TX3540, TX3110 & TX680, [B][COLOR=#ff6633]Maxtrax[/COLOR][/B], Kaymar Dual Wheel Carrier, Breathers, Federal MT's.[/SIZE]Comment
-
9.
Tighten the passenger side rear bolt.
Tools required - 12mm ratchet spanner, or 12mm spanner, or 12mm socket spanner
10.
Tighten the driver’s side front bolt.
Tools required - 12mm ratchet spanner, or 12mm spanner, or 12mm socket spanner
11.
Tighten the passenger side front bolt.
Tools required - 12mm ratchet spanner, or 12mm spanner, or 12mm socket spanner
Cont...[SIZE=2]Black 2009 150 Series D4D GXL Prado, [B]TG150[/B] Transfer Case & Actuator Guard, TJM T13 bar, TJM 9.5lb Winch, Airtec Snorkel, TJM steel sidesteps and sidebars, TJM Underbody Protection, TJM XGS Gold Suspension, Tinted, ARB Fridge Freezer, Couplertec System, Foxwing Awning, 80AH Dual battery, 8" indash GPS, Wet Seat seatcovers, GME TX3540, TX3110 & TX680, [B][COLOR=#ff6633]Maxtrax[/COLOR][/B], Kaymar Dual Wheel Carrier, Breathers, Federal MT's.[/SIZE]Comment
-
Finished.
View from driver’s side rear.
View from drivers side.
View from underneath, access to Transfer Case drainage bolt still accessible.
Sorry but in these times I have to include this.
Disclaimer: The purchase and installation of the TG150 and the TG120 Traction Control guard is at the sole responsibility of the purchaser/owner.
We are not to be held liable for any damage to your vehicle as a result of impact or any off road driving.Last edited by Brains; 29-04-2012, 09:26 PM.[SIZE=2]Black 2009 150 Series D4D GXL Prado, [B]TG150[/B] Transfer Case & Actuator Guard, TJM T13 bar, TJM 9.5lb Winch, Airtec Snorkel, TJM steel sidesteps and sidebars, TJM Underbody Protection, TJM XGS Gold Suspension, Tinted, ARB Fridge Freezer, Couplertec System, Foxwing Awning, 80AH Dual battery, 8" indash GPS, Wet Seat seatcovers, GME TX3540, TX3110 & TX680, [B][COLOR=#ff6633]Maxtrax[/COLOR][/B], Kaymar Dual Wheel Carrier, Breathers, Federal MT's.[/SIZE]Comment
-
Have just sent a PM, is there anybody in the Townsville area who is getting a guard?
Maybe we can get them shipped together?? Let me know if there is please?
Cheers
LawrieComment
-
Awesome work Paul...can't wait to pick mine up and install, once I get back to town.[SIZE=2][FONT=arial narrow]2011 Crystal Pearl V6 Kakadu / 3M Tint / Prodigy Brake Controller / GME TX3440 UHF / ABR Battery Tray / Piranha DBE180S+ Isolator / Optima D34 Aux Battery / TJM Airtec Snorkel / ARB Colour Coded Deluxe Winch Bar / ARB Underbody Protection / Outback Ideas Recovery Points / Britax XRay 200 HID Spotties[/FONT][/SIZE]Comment
-
Paul have paid for mine tonight. PM'd you my delivery details also.
Thanks again ![CENTER][B][U]Matt
[/U][/B]2012 Silver GXL TD 6 Speed manual with some stuff..
[/CENTER]
[CENTER][SIZE=2]My 2008 Lifestyle 360i camper - [URL]http://myswag.org/forum/index.php?topic=21797.0[/URL]
My 4WD Action write up 2004 120 V6 Prado - [URL]http://www.4wdaction.com.au/articles/2012/complete-package[/URL][/SIZE][/CENTER]
[SIZE=2]
[/SIZE][CENTER][SIZE=2]
[/SIZE][/CENTER]Comment
-
All good Matt, just about to send Glenn a PM so yours and his are all ready to go.Originally posted by Matt - mr4x4 View Post
Paul[SIZE=2]Black 2009 150 Series D4D GXL Prado, [B]TG150[/B] Transfer Case & Actuator Guard, TJM T13 bar, TJM 9.5lb Winch, Airtec Snorkel, TJM steel sidesteps and sidebars, TJM Underbody Protection, TJM XGS Gold Suspension, Tinted, ARB Fridge Freezer, Couplertec System, Foxwing Awning, 80AH Dual battery, 8" indash GPS, Wet Seat seatcovers, GME TX3540, TX3110 & TX680, [B][COLOR=#ff6633]Maxtrax[/COLOR][/B], Kaymar Dual Wheel Carrier, Breathers, Federal MT's.[/SIZE]Comment
Comment