Daz's 2010 Kakadu is getting some lovin

[KAKADAZ Avid PP Poster! Find all posts View Profile Close KAKADAZ]

After finally buying my wife a new Kluger Grande I can now take over the Prado and get some things happening I'm ordering this week

Lovell 50mm raised springs with 4x bilsteins (bracket lowered for bags to self raise 40mm) until airbag mans new lifted bags are ready.
TJM T13 colour coded bar
X-Ray (britax) 200 series Hid spotties
Brown Davies bash plate (now available for KDSS)
Short wool seat covers (generally not a fan but the leather is crap in the Kaka)
Airtec Snorkel

Thats all I want to do to it for now VERY much looking forward to it will post up some pictures when done.

Cooper Zeon ATZ's already done 285x60x18 loving them...

[timmay5.7 Advanced Member Find all posts View Profile Close timmay5.7]

Bring it down to my office when it's done Daz...

[KAKADAZ Avid PP Poster! Find all posts View Profile Close KAKADAZ]

Bring it down to my office when it's done Daz...

Will do Mr magoo..May be heading out sunday morning to moore river and through some tracks up there along the beach etc if your keen? there's about 4 cars going/

[kondo Junior Member Find all posts View Profile Close kondo]

Daz,

I am sorry I just realised I was supposed to measure the ride height on the front and forgot all about it...

I can do it in the morning if you still need it?

Again Sorry mate.

[blw Member Find all posts View Profile Close blw]

Whats the cost of the KDSS modified bash plates?

[KAKADAZ Avid PP Poster! Find all posts View Profile Close KAKADAZ]

Daz,

I am sorry I just realised I was supposed to measure the ride height on the front and forgot all about it...

I can do it in the morning if you still need it?

Again Sorry mate.

No mate it's all good thanks.

[KAKADAZ Avid PP Poster! Find all posts View Profile Close KAKADAZ]

Whats the cost of the KDSS modified bash plates?

$450 plus postage of $65 to Perth.

[KAKADAZ Avid PP Poster! Find all posts View Profile Close KAKADAZ]

I did the spacers between the leveling sensors yesterday and it worked a treat. Rear went from
Passenger rear 765mm to 810mm
Drivers rear. 775mm to 810mm

Cars in Friday for Bilsteins and front 45mm raised Lovells then I will fine tune the rear Hieght to match.

[KAKADAZ Avid PP Poster! Find all posts View Profile Close KAKADAZ]

Picked up the car today with the lift....ride is good feels like the standard setting on the ride control which is great. The car is sitting at about 820mm front and rear (which is up about 45-50mm ) all round. It looks slightly higher in the front but the bar should level it all up well. The Brown Davis bash plate also arrived so I will whack that on tomorrow.

[KAKADAZ Avid PP Poster! Find all posts View Profile Close KAKADAZ]

Installed the Brown Davis bashplate today (great bit of gear) its much stronger and better designed than the factory gaurds and certainly wont gather so much bloody sand.. I also tweaked the back bags today to raise them a bit more ending up with 820mm passenger side and 830mm drivers side..front is 810mm and 810mm..
Next week I am ordering the T13 bar, Xray Hid spotties and Airtec from TJM Oconner so that should be on in 2-3 weeks...Once the front seat covers come from Prestige sheepskins then she's all done (until I think of something else)..
Im off to York tomorrow to find some tracks..

[wooley Avid PP Poster! Find all posts View Profile Close wooley]

the bilsteins/lovells look really nice.

why did you choose prestige sheep skins over other companies? I'm trying to find a company to go with at the moment, so many choices.

[KAKADAZ Avid PP Poster! Find all posts View Profile Close KAKADAZ]

the bilsteins/lovells look really nice.

why did you choose prestige sheep skins over other companies? I'm trying to find a company to go with at the moment, so many choices.

I used to sell their seat covers when I worked in the car game and the quality was always spot on. There isn't alot of choice in Perth but either way their wool covers are top notch. I will post some pictures when they go on.

[wooley Avid PP Poster! Find all posts View Profile Close wooley]

I used to sell their seat covers when I worked in the car game and the quality was always spot on. There isn't alot of choice in Perth but either way their wool covers are top notch. I will post some pictures when they go on.

ahh ok, they look exceptional, but its always a bit hard to tell from a photo.
i look forward to the pics.

[KAKADAZ Avid PP Poster! Find all posts View Profile Close KAKADAZ]

ahh ok, they look exceptional, but its always a bit hard to tell from a photo.
i look forward to the pics.

They do look better in the flesh but will have them on in a couple of days so will post up pics...

I went to york on the weekend and tried a few small tracks so far the shocks and lovells are working well...just waiting for some time to get out and really test em..

[KAKADAZ Avid PP Poster! Find all posts View Profile Close KAKADAZ]

ahh ok, they look exceptional, but its always a bit hard to tell from a photo.
i look forward to the pics.

Sorry about the iphone quality..





And one showing how the ride height is sitting now..