AMTS 120/150 Prado & FJ bash plates. SA made/supplied.

[craigm Addicted PP Member Find all posts View Profile Close craigm]

Hey Andrew, does your latest batch of bash plates have the changes at the back at the cross member. You mentioned that you were looking at taking the rear section over and a little past the exhaust? and what was your solution to the nutserts?

[waltec Senior Member Find all posts View Profile Close waltec]

Hi Andrew,
Any 120 diesels in stock ATM??

Thanks
Matt

[Guest Close Guest]

Hey Andrew, does your latest batch of bash plates have the changes at the back at the cross member. You mentioned that you were looking at taking the rear section over and a little past the exhaust? and what was your solution to the nutserts?

Sorry, dodn't see this post.
I am rethinking the exhaust plate as it was going to be attached to the transfer case. This plate also needs to be easily removed to access the uni joints on the prop shaft. Extending the transmission plate in a cantilever fashion is not satisfactory as it will bend up and cause rattles with the exhaust. There doesn't seem to be a simple solution to this...

I'm using splined nutserts now.

[Guest Close Guest]

Hi Andrew,
Any 120 diesels in stock ATM??

Thanks
Matt

None at the moment. Currently on order which reminds me that I need to check up on my order.

[Jester Junior Member Find all posts View Profile Close Jester]

Hey Amts whats the ETA on 120 D4D bash plates?

[tunnel Lurker Find all posts View Profile Close tunnel]

Hi Amts another one interested in 120 D4D auto plates ETA? Cheers

[Unit01 Lurker Find all posts View Profile Close Unit01]

Hi Andrew,

I'm keen on a set for 120 D4D auto as well.

Cheers

[Guest Close Guest]

Sorry, still waiting.....

[mattstruck Junior Member Find all posts View Profile Close mattstruck]

Hi Amts,

whats the turnaround on a set for the 150?

[robbo14 Junior Member Find all posts View Profile Close robbo14]

Hi Atms,

While your at it, whats the turn around for 120 Petrol?

[mattstruck Junior Member Find all posts View Profile Close mattstruck]

AMTS?

Still kicking around mate?

[Guest Close Guest]

Yes, still around. I'm doing the 120 ones first. Still waiting for those.

[Guest Close Guest]

I had issues finding a plater that has a tank big enough to fit the plates in AND doesn't charge an arm and a leg to plate it.

It is at the laser cutting stage at the moment as the order got put on hold while the plating was being sorted out.

[DJD120GXL Senior Member Find all posts View Profile Close DJD120GXL]

Any rough ETA Andrew? Id be keen to get some and happy to pay a deposit.
cheers

[SimpleSi Member Find all posts View Profile Close SimpleSi]

Interested in some guards for a 2010 GXL 150 diesel. I'm possibly the least handy Pradopointer, so am I correct in saying no drilling required, and all screws/bolts come with? Also I may get a bullbar installed at a later date. That won't cause problems?