I had a 120 D4D for just over 9 years, so I know that I will probably keep this 150 for about the same. With that in mind, I am going hard early, to maximise the value from all the mods/accessories. However, I want to avoid any permanent changes, so new holes and cutting will be kept to a minimum. First big trip will be the Simpson in July 2017.
Dealer fitted:
Tinted windows
TJM Explorer Bull Bar Colour coded
Cooper AT/3 Tyres (I had Cooper ST on my last rig, and wanted a little less noise this time)
Safari Snorkel
Bonnet protector
https://www.dropbox.com/s/j33ua11hwq...e988f.JPG?dl=0
I've since done:
VicOffRoad 23in LED Light Bar (48x7W Osram) with Air On Board Prado button.
Uniden 8080S above the glovebox in the card holder area. Remote mic head plugs in to modified console blank and mounts on a HoldMyPhone 'ClicOn Centre Mount - low' with mic holder screwed to it. Power from center console cig lighter wire.
GME AS004 heavy duty spring base, AE4706 (2.1m, 8.1dB gain for desert) and AE4704 (600mm, 2.1dB gain for mountains), using bullbar mount point
https://www.dropbox.com/s/kjdvsoikrh...10f5a.JPG?dl=0
https://www.dropbox.com/s/tzjcqw99dz...a7ca7.JPG?dl=0
https://www.dropbox.com/s/672a44r7dr...5353c.JPG?dl=0
Lamin-x Door Cup protectors - might be overkill now with keyless entry, but ladies' rings still seem to take their toll - no photo, they are supposed to be invisible!
Darche 2x2.5m Awning and 4WDSC Awning (yes, they are compatible, its as if they were made in the same factory…). I used a Rhino-Rack Awning mount kit and used all 8 mounts - overkill, but it shouldn't move.
https://www.dropbox.com/s/tdfiwxalfn...4c92e.JPG?dl=0
Rhino-Rack Vortex SX Roof Bars, Medium Steel Mesh Basket and u-Bolts
Drifta 2 drawer and fridge-box with table (rear seats removed)
Waeco fridge slide and CF60
https://www.dropbox.com/s/uv5oh3tzw4...E6907.JPG?dl=0
Bushskinz front, sump and transmission guard (didn't really need the transmission guard, but might stop the odd stone)
https://www.dropbox.com/s/aipkl0ntan...0E288.JPG?dl=0
Eurodivision Rubber Mats and Supertrim neoprene seat covers - keep the leather and carpet mats protected from the kids
Kaon Half Height cargo barrier - really happy with their design and should stop the kids from being pelted with sleeping bags and clothes
https://www.dropbox.com/s/moa0mk3h4k...265db.JPG?dl=0
https://www.dropbox.com/s/5xzkjb7ehx...f3154.JPG?dl=0
Konik T15 CREE reverse globes
Replaced all the T10 halogens with T10 LEDs
Upgraded high beams to PHILIPS HB3 9005 4300K 65W Crystal Vision White
TJM Winch
To do:
AirOnBoard Recovery Tow Points - need to remove bull bar to fit them
Engine ECU tune - waiting on more reviews
Dealer fitted:
Tinted windows
TJM Explorer Bull Bar Colour coded
Cooper AT/3 Tyres (I had Cooper ST on my last rig, and wanted a little less noise this time)
Safari Snorkel
Bonnet protector
https://www.dropbox.com/s/j33ua11hwq...e988f.JPG?dl=0
I've since done:
VicOffRoad 23in LED Light Bar (48x7W Osram) with Air On Board Prado button.
Uniden 8080S above the glovebox in the card holder area. Remote mic head plugs in to modified console blank and mounts on a HoldMyPhone 'ClicOn Centre Mount - low' with mic holder screwed to it. Power from center console cig lighter wire.
GME AS004 heavy duty spring base, AE4706 (2.1m, 8.1dB gain for desert) and AE4704 (600mm, 2.1dB gain for mountains), using bullbar mount point
https://www.dropbox.com/s/kjdvsoikrh...10f5a.JPG?dl=0
https://www.dropbox.com/s/tzjcqw99dz...a7ca7.JPG?dl=0
https://www.dropbox.com/s/672a44r7dr...5353c.JPG?dl=0
Lamin-x Door Cup protectors - might be overkill now with keyless entry, but ladies' rings still seem to take their toll - no photo, they are supposed to be invisible!
Darche 2x2.5m Awning and 4WDSC Awning (yes, they are compatible, its as if they were made in the same factory…). I used a Rhino-Rack Awning mount kit and used all 8 mounts - overkill, but it shouldn't move.
https://www.dropbox.com/s/tdfiwxalfn...4c92e.JPG?dl=0
Rhino-Rack Vortex SX Roof Bars, Medium Steel Mesh Basket and u-Bolts
Drifta 2 drawer and fridge-box with table (rear seats removed)
Waeco fridge slide and CF60
https://www.dropbox.com/s/uv5oh3tzw4...E6907.JPG?dl=0
Bushskinz front, sump and transmission guard (didn't really need the transmission guard, but might stop the odd stone)
https://www.dropbox.com/s/aipkl0ntan...0E288.JPG?dl=0
Eurodivision Rubber Mats and Supertrim neoprene seat covers - keep the leather and carpet mats protected from the kids
Kaon Half Height cargo barrier - really happy with their design and should stop the kids from being pelted with sleeping bags and clothes
https://www.dropbox.com/s/moa0mk3h4k...265db.JPG?dl=0
https://www.dropbox.com/s/5xzkjb7ehx...f3154.JPG?dl=0
Konik T15 CREE reverse globes
Replaced all the T10 halogens with T10 LEDs
Upgraded high beams to PHILIPS HB3 9005 4300K 65W Crystal Vision White
TJM Winch
To do:
AirOnBoard Recovery Tow Points - need to remove bull bar to fit them
Engine ECU tune - waiting on more reviews
Comment