Hi guys,
I've recently noticed something odd about the switch lights on my Grande's aircond control switches. The green LEDs which light up the text of the switches appears to have gone. So when driving at night, I can't see the switches. Only the central row has gone. The 4 button cluster on the left and right are still fine. (The left cluster is the front & rear window demisters and passenger side temperature up/down. The right cluster is system on and driver's temp up/down). Although the right cluster went off a few times but a sharp slap on the plastic trim below the buttons brought the lights back to life and it seems to be OK now.
The buttons are all functioning correctly. The LED lights to show that the aircond system is ON and the aircond is ON are working fine. Only the LEDs that light up the text has gone.
I took off the console to have a look behind to see if any plugs are lose and they all seem fine. I plugged and unplugged the 3 directly behind the switches. The module looks pretty well sealed, otherwise I would take a look at the PCB.
Anyone encountered this problem? Or can give some suggestions....
I've recently noticed something odd about the switch lights on my Grande's aircond control switches. The green LEDs which light up the text of the switches appears to have gone. So when driving at night, I can't see the switches. Only the central row has gone. The 4 button cluster on the left and right are still fine. (The left cluster is the front & rear window demisters and passenger side temperature up/down. The right cluster is system on and driver's temp up/down). Although the right cluster went off a few times but a sharp slap on the plastic trim below the buttons brought the lights back to life and it seems to be OK now.
The buttons are all functioning correctly. The LED lights to show that the aircond system is ON and the aircond is ON are working fine. Only the LEDs that light up the text has gone.
I took off the console to have a look behind to see if any plugs are lose and they all seem fine. I plugged and unplugged the 3 directly behind the switches. The module looks pretty well sealed, otherwise I would take a look at the PCB.
Anyone encountered this problem? Or can give some suggestions....
Comment