im getting a dump pipe made up an a little while, i just need to know what size socket i need to weld into the dump pipe for future fitting of the egt sensor, is it 1/8 npt or bsp etc. cheers samo
Announcement
Collapse
No announcement yet.
dump pipe egt fitting size
Collapse
X
-
Re: dump pipe egt fitting size
Samo,
EGT thermocouple fittings will usually be one of two different sizes, either 1/8"BSP or 1/4"NPT. (1/4"NPT is what comes standard on a TaipanXP exhaust)
When I put in my EGT gauge I found the best option was to buy the gauge from the US and buy the thermocouple locally.
My gauge is an Auber SYL-1813
http://www.auberins.com/index.php?ma...products_id=19
and I got the thermocouple from:
Temperature Controls in Sefton NSW
http://www.temperature.com.au
Though you need to know what to ask for. The details of my thermocouple are:
K Type
3mm x 100mm
Fibreglass/ stainless steel braid cable
1/4 NPT compression fitting
2.2m cable
LeachyEX-Prado Owner
Comment
Comment