Removing the console cover allows you access to adjust the handbrake, provides access to the rear of the cigarette lighter and also the blanking plates to allow you to add more switches etc.
Refer to the following link for the first stage which involves removing the drink holder.
http://www.pradopoint.com/viewtopic.php?f=6&t=4477 Scroll down
OK the second stage:
Remove the silver trims on each side of the console
Unscrew the gear knobs and unzip the handbrake cover
Pull up on the end nearest to the drink holder until it unclips then pull up on each corner on the front
Lift up the end of the cover over the handbrake. You may have to loosen off the handbrake so the cover slides off
View with cover off and view of underneath the cover
Refer to the following link for the first stage which involves removing the drink holder.
http://www.pradopoint.com/viewtopic.php?f=6&t=4477 Scroll down
OK the second stage:
Remove the silver trims on each side of the console
Unscrew the gear knobs and unzip the handbrake cover
Pull up on the end nearest to the drink holder until it unclips then pull up on each corner on the front
Lift up the end of the cover over the handbrake. You may have to loosen off the handbrake so the cover slides off
View with cover off and view of underneath the cover
Comment