Announcement

Collapse
No announcement yet.

Need help installing LED Mirror Cover..

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need help installing LED Mirror Cover..

    I Bought the led mirror cover on E-bay, but can't figure out the wireing. I figured to tap in to the side blinker....but how....?
    Attached Files

  • #2
    Re: Need help installing LED Mirror Cover..

    Hi Darin,

    Some pictures might help us understand what you are trying to do...... and where abouts are you?
    [color=#0040FF]Rob[/color]
    [color=#0040BF]2012 Altitude D4D &
    04 Jayco Eagle Outback[/color]

    Comment


    • #3
      Re: Need help installing LED Mirror Cover..

      I think I did post on how to do this?

      I searched the web for the lights and found a site that tells you how to do it.

      I connected the wiring to the side blinker lights, just thread the led wires inside the door, through the rubber door thingo that holds the wires, just pull out the side blinker and connect the wires.
      October 2003 build GLX Prado Diesel. Nudge Bar, window tinting, fitted sheepskin seatcovers, bonnet protector, cargo barrier, sandgrabba mats and empty pockets.
      Retired Nt Police and now TPI

      Comment


      • #4
        Re: Need help installing LED Mirror Cover..

        Hi Oldsalt,

        Yeah found your how to, it wasn't really helpful....

        Thank you anyway,

        Darin.

        Comment


        • #5
          Re: Need help installing LED Mirror Cover..

          These look nice. Please update us on developments and how your install works out.

          Comment


          • #6
            Re: Need help installing LED Mirror Cover..

            it wasn't really helpful....
            I figured to tap in to the side blinker....but how....?
            What exactly is the issue? joining the wires into the existing loom? just use a couple of scotch locks, or if you have the tools you can solder them in and heat shrink the joins. You could also use crimps (a straight joiner) if you wanted.

            As your running LEDs make sure you get your polarities right or they won't work (-ve and +ve the right way around).

            Mick
            [CENTER][B][I][SIZE=1][COLOR=blue]1KZ-TE Turbo Diesel, 5 speed manual, 3.5 inch lift, 265/70/17 Mickey Thompson MTZ, D-Tronic chip, Boost controller, mandrel exhaust, dump pipe, modified intake, ARB steel bar, Magnum winch, Safari snorkel, rear drawers, half cargo barrier, dual batteries, Uniden UHF, Sat Nav, reverse camera, Magellan XL , Tjm bash plates, ARB alloy roof rack, rear telescopic work light and numerous other modifications!!!
            Now with 3BAR MAP sensor & 18PSI Boost![/COLOR][/SIZE][/I][/B][/CENTER]

            Comment


            • #7
              Re: Need help installing LED Mirror Cover..

              Thanks for the idea's Mick, Tomorrow i will be installing them, now i only have to
              figure out were to run the wires so they would not be visible.

              Darin.

              Comment

              canli bahis siteleri bahis siteleri ecebet.net
              mencisport.com
              antalya escort
              tsyd.org deneme bonusu veren siteler
              deneme bonusu veren siteler
              gaziantep escort
              gaziantep escort
              asyabahis maltcasino olabahis olabahis
              erotik film izle Rus escort gaziantep rus escort
              atasehir escort tuzla escort
              sikis sex hatti
              en iyi casino siteleri
              deneme bonusu veren siteler
              casibom
              deneme bonusu veren siteler
              deneme bonusu veren siteler
              betticket istanbulbahis
              Working...
              X