Hi Pradopointers,
I have been asked about the existing vehicle wiring for the reverse camera in Prado's, so I thought I'd put it here with photos.
My car is a 2008 model GXL, but I believe that the wiring exists for all 120 series Prado's
*WARNING* Lots of photos, so download could be slow!!
Wiring in the front connector and what I used it for.
1.Black (-ground camera)
2.White (camera video shield wire)
3.Red (+12 Volt camera - obtained from reverse wire in front left hand kick panel Red wire with Black trace)
4.Yellow (camera video centre wire)
Wiring in the rear connector and what I used it for.
1.Black (-ground camera)
2.White (camera video shield wire)
3.White with Black dot (+12 Volt camera) you may have to slice open black insulation covering all 4 wires to find the dot.
4.Brown (camera video centre wire)
I have shown in these pictures what you need to do in the tailgate end to get it all working and I will add pictures of the front install when I install my bosses unit (I didn't photograph mine)
[attachment=1:1951o7ci]IMG_3469 v2.JPG[/attachment:1951o7ci]
[attachment=2:1951o7ci]IMG_3452v2.JPG[/attachment:1951o7ci]
[attachment=0:1951o7ci]IMG_3453v2.JPG[/attachment:1951o7ci]
I have been asked about the existing vehicle wiring for the reverse camera in Prado's, so I thought I'd put it here with photos.
My car is a 2008 model GXL, but I believe that the wiring exists for all 120 series Prado's
*WARNING* Lots of photos, so download could be slow!!
Wiring in the front connector and what I used it for.
1.Black (-ground camera)
2.White (camera video shield wire)
3.Red (+12 Volt camera - obtained from reverse wire in front left hand kick panel Red wire with Black trace)
4.Yellow (camera video centre wire)
Wiring in the rear connector and what I used it for.
1.Black (-ground camera)
2.White (camera video shield wire)
3.White with Black dot (+12 Volt camera) you may have to slice open black insulation covering all 4 wires to find the dot.
4.Brown (camera video centre wire)
I have shown in these pictures what you need to do in the tailgate end to get it all working and I will add pictures of the front install when I install my bosses unit (I didn't photograph mine)
[attachment=1:1951o7ci]IMG_3469 v2.JPG[/attachment:1951o7ci]
[attachment=2:1951o7ci]IMG_3452v2.JPG[/attachment:1951o7ci]
[attachment=0:1951o7ci]IMG_3453v2.JPG[/attachment:1951o7ci]
Comment